The Sunlu S1 is ok, it's not great though. I modified mine to make it way more efficient.
Check out the YouTube video here:
https://youtu.be/5jCVT0lXKyU
Mark 2 Mods and Build Guide Here:
https://youtu.be/8ET9EJrA0v0
Links to parts in the video descriptions.
Fan blades should be printed with very small nozzle and small layer height. I used a 0.2mm.
You could try 0.4mm but you may need to do some clean up after to get a smooth operation.
I also printed in PETG but there is no reason why other plastics wouldn't work. Print the blades upright on their end with a good brim for adhesion and go slow.
Other parts can be printed quicker with less worry.
Let me know if you have any questions.
#3d_printer_accessories #cults